AIX:Savebase failed

From RoggeWiki
Revision as of 11:43, 25 September 2010 by Tom (talk | contribs) (Created page with 'albiet(root)# unmirrorvg rootvg hdisk0 0516-1246 rmlvcopy: If hd5 is the boot logical volume, please run 'chpv -c <diskname>' as root user to clear the boot record and av…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

albiet(root)# unmirrorvg rootvg hdisk0 0516-1246 rmlvcopy: If hd5 is the boot logical volume, please run 'chpv -c <diskname>'

       as root user to clear the boot record and avoid a potential boot
       off an old boot image that may reside on the disk from which this
       logical volume is moved/removed.

0516-1734 rmlvcopy: Warning, savebase failed. Please manually run 'savebase' before rebooting. 0516-1734 rmlvcopy: Warning, savebase failed. Please manually run 'savebase' before rebooting. 0516-1734 rmlvcopy: Warning, savebase failed. Please manually run 'savebase' before rebooting. 0516-1734 rmlvcopy: Warning, savebase failed. Please manually run 'savebase' before rebooting. 0516-1734 rmlvcopy: Warning, savebase failed. Please manually run 'savebase' before rebooting. 0516-1734 rmlvcopy: Warning, savebase failed. Please manually run 'savebase' before rebooting. 0516-1734 rmlvcopy: Warning, savebase failed. Please manually run 'savebase' before rebooting. 0516-1734 rmlvcopy: Warning, savebase failed. Please manually run 'savebase' before rebooting. 0516-1734 rmlvcopy: Warning, savebase failed. Please manually run 'savebase' before rebooting. 0516-1734 rmlvcopy: Warning, savebase failed. Please manually run 'savebase' before rebooting. 0516-1734 chvg: Warning, savebase failed. Please manually run 'savebase' before rebooting. 0516-1132 unmirrorvg: Quorum requirement turned on, reboot system for this

       to take effect for rootvg.

0516-1144 unmirrorvg: rootvg successfully unmirrored, user should perform

       bosboot of system to reinitialize boot records.  Then, user must modify
       bootlist to just include:  hdisk2.

0516-1734 unmirrorvg: Warning, savebase failed. Please manually run 'savebase' before rebooting. albiet(root)# lslv -m hd5 hd5:N/A LP PP1 PV1 PP2 PV2 PP3 PV3 0001 0001 hdisk2 albiet(root)# bosboot -ad hdisk2

bosboot: Boot image is 30425 512 byte blocks. albiet(root)# lsvg -p rootvg rootvg: PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION hdisk0 active 539 523 108..92..107..108..108 hdisk2 active 575 278 14..19..15..115..115 albiet(root)# migratepv hdisk0 albiet(root)# which ipl_varyon /usr/sbin/ipl_varyon albiet(root)# man ipl_varyon Manual entry for ipl_varyon not found or not installed. albiet(root)# ipl_varyon -i


PVNAME BOOT DEVICE PVID VOLUME GROUP ID hdisk0 NO 00c5174f9949f2e20000000000000000 00c5174f00004c00 hdisk2 YES 00c5174f1b70ab510000000000000000 00c5174f00004c00 hdisk1 NO 00c5174f994a972a0000000000000000 00c5174f00004c00 hdisk3 NO 00c5174f1b70d3dc0000000000000000 00c5174f00004c00 albiet(root)# savebase -v saving to '/dev/hd5' 52 CuDv objects to be saved 171 CuAt objects to be saved 24 CuDep objects to be saved 9 CuVPD objects to be saved 355 CuDvDr objects to be saved 8 CuPath objects to be saved 4 CuPathAt objects to be saved 0 CuData objects to be saved Number of bytes of data to save = 22238 Compressing data Compressed data size is = 7771

       bi_start     = 0x3600
       bi_size      = 0xef7a00
       bd_size      = 0xed7a00
       ram FS start = 0x4fb220
       ram FS size  = 0x9dc749
       sba_start    = 0xedb000
       sba_size     = 0x20000
       sbd_size      = 0x1e5a

Checking boot image size:

       new save base byte cnt = 0x1e5f

Wrote 7775 bytes savebase : successful completion albiet(root)#