User:Tom/RHCE EX300-2

25 Configuring Kerberos

KDC     Key Distribution Center. A central key server. Issues tickets.
Realm   All hosts taht use the same KDC to get tickets.
TGT     Ticket Granting Ticket

Principal name nfs/server.example.com@EXAMPLE.COM
User name      tom@EXAMPLE.COM

Using nslcd or sssd as Authentication Backend Service

Verify that sssd packges are installed before using the authconfig utilities.. Use a gui, sssd is then used by default. Use yum group install "Directory Client" to install sssd and related packages. Start sssd before using the authconfig utilities.

/etc/sysconfig/authconfig
FORCELEGACY=no                Switch off nslcd.
USESSSD=yes
USESSSDAUTH=yes

Commands

authconfig                Configure LDAP authentication with Kerberos authorization.
authconfig --test         Get an overview of the current configuration and see what services are used.
authconfig-tui
authconfig-gtk

kinit                      Obtain and cache kerberos ticket-granting ticket.
klist                      Lists cached Kerberos tickets.

Files

/etc/krb5.keytab             Needed by a server hosting Kerberized services. Contains names of all service principals on that server.

/etc/nslcd.conf              Alternative for sssd.
/etc/nsswitch.conf 
/etc/openldap/cacerts        Stores root certificate authorities
/etc/openldap/ldap.conf      LDAP client configuration
/etc/pamd.d/
/etc/sssd/sssd.conf          Daemon used for retrieving and caching user and authentication information.
                             Install sssd service before using the authcong utilities (yum install group "Directory Client").
/etc/sysconfig/authconfig    

Packages

pam_krb5
krb5-workstation

26 iSCSI

Commands

targetcli
firewall-cmd --add-service iscsi-target --permanent
firewall-cmd --reload
systemctl start target
systemctl enable target

iscsiadm

Packages

targetcli                 Target

iscsi-initiator-utils     Initiator
lsscsi

30 Routing and Networking

Commands

IPv6 Addresses / Networks
::1/128                        Local host.
::                             All addresses.
::/0                           The default router
2000::/3                       Global unicast address.
fc00::/7                       Unique local address.
fe80::/64                      Link-local address.
ff00::/8                       Multicast
20001::db8/32                  Addresses reserved for use in documentation.

man 5 nmcli-examples           Examples how to create a team interface
man -k team                    

nmcli con add type team con-name team0 config '{ "runner"; {"name": "loadbalance"}}'
nmcli con mod team0 ipv4.addresses 192.168.122.131/24
nmcli con add tpye team-slave ifname eth1 master team0
nmcli con add type team-slave ifname eth2 master team0

nmcli con show et01                 Shows detailed IP configuration (for example: ipv4.addresses)
nmcli con add con-name eth1 type ethernet ifname eth1 ip6 2001:db8:0:1::100/64 gw6 2001:db8:0:1::1 ip4 192.168.122.131/24 gw4 192.168.122.1
mncli con mod con-name eth1 ipv6.address "2001:db8:0:1::1" 
nmcli con mod con-name eth1 +ipv6.address "2001:db8:0:2::1"

nmcli con up team0
nmcli con show
teamdctl team0 state 
teamdctl team0 state view
teamnl team0 options             
ip link show

ip route show

Files

/etc/sysconfig/network-scripts/ifcfg-team0
/etc/sysconfig/network-scripts/ifcfg-team-slave-eth[12]

/etc/sysctl.d/forwarding.conf (net.ipv4.p_forward = 1)            Enable forwarding to configurethe server as a router.

32 Advanced Firewall Configuration

Basic ordering rules within zones:

• Direct rules
• Port forwarding and masquerading
• Logging rules
• Allow rules
• Deny rules

For NAT the server needs to be configured as a router: /proc/sys/netipv4/ip_forward=1 Two types of NAT

• Masquerading: IP address of a node is changed by the IP address of the NAT router.
• Port forwarding: The NAT router redirects all traffic to a public port on the NAT router to another port, and possible another host, on the private network.

Commands

firewall-cmd --reload                        
firewall-cmd --get-services                  Shows all services which are stored in /usr/lib/firewalld/services and /etc/firewalld/services

firewall-cmd --add-rich-rule=' rule '
firewall-cmd --remove-rich-rule=' rule '
firewall-cmd --query-rich-rule=' rule '
firewall-cmd --list-rich-rules

firewall-cmd --timeout='xx'                  Lifetime of the rich rule

man firewalld.richlanguage                   Shows rich language examples

Files =

/etc/firewalld/services
/usr/lib/firewalld/services

...

34 DNS

Unbound is the preferred package.

Install, enable and start unbound.

/etc/unbound/unbound.conf

35 MariaDB

install mariadb mariadb-server mariadb test
systemctl start mariadb
systemctl enable mariadb

Italic text

firewall-cmd --add-service mysql --permanent

mysql_secure_installation
/usr/libexec/mysqld --help --verbose          Information about all the settings

show databases;
use databases;
create database dbname;
create tsble tablename (name varchar(40),place varchar(40));
describe tablename;

delete from tablename where field = ' value ';
update tablename set field = value where field2 = ' value ';
insert into tablename (field1,field2) values(' value1 ',' value2 ');

where clause = <> > >= <  >= BETWEEN LIKE IN

create user username@'localhost' identified by password;
drop user 'username'@'localhost';
grant select,update,delete,insert on *.* to username@'localhost';  
grant all priviliges on ...

mysqldump -u root =p -p database --databases >dumpfileItalic text
drop database databasename;
create database databasename;
mysql -u root -p -p databasename <dumpfile;

37 Samba

man mount.cifs credentials= option

39 Configure SSH

semanage port, man sshd_config, ssh-agent, ssh-add, ssh tunnel.

40 Time synchronisation

Chronyd daemon, chronyc command. ntp port 123. start, enable, firewall-cmd --add-service

List commands
getsebool -a                      List all selinux booleans
seinfo                            SELinux policy query tool
         --all
         -r                       List all roles
         -t                       List all types (*-t)
         -u                       List all users
semanage boolean --list           List SELinux booleans with comments
semanage fcontext -l              List all current rules